Gen2 Foil Drive Assist Max
The Foil Drive Assist MAX is the flagship model, for the ultimate in hybrid electric assist foiling. As the name suggests, the Assist MAX offers the maximum thrust, run time and versatility!
The kit includes everything you need to turn your existing foil and board into an electric assisted foiling machine. All units come with the new V2 motors. We have the universal inner pods in stock and they are come with new 2025 units.
The Foil Drive Assist MAX is perfectly suited to those looking for extra thrust for heavier riders or smaller boards and foils, longer ride times and ultimate flexibility of how you choose to foil. Surf, Downwind, Wake and Flatwater, the Assist MAX does it all!
Install on any Foil Board and Mast
Gen2 Foil Drive Systems mount between your mast plate and the board. Because foil mast tracks are universal, this means it fits any board! Simply use the provided locking T nuts and longer mast bolts. Sandwich your Gen2 Foil Drive between your gear for optimal weight distribution and a clean board top surface.
Easy step-by-step installation instructionsTech Specs
Maximum Thrust: 27.5kg (60.6lbs) with Three Blade Alloy Props
Weight Range: 3.4 - 4.5kg (7.4-9.9lbs) depending on battery
Dimensions: L415 x W250 x H50mm
Operating Voltage: 40V
Runtime (Generalized): 40min-4hrs depending on use case, battery and other variables.
Recharge Time: Appx. 2-3.5hrs (Power Battery)
Batteries: IP68 rated dust and water resistant.
Simply choose your desired:
- MAX Battery (3 options)
- Gen2 Motor Cord Length
Battery Options
MAX Power Battery
The largest MAX battery offering the longest run time with high power performance. This battery must be used with the Assist MAX, Nose Cone A.
Volts: 40V
Energy: 498.69Wh
MAX Sport Battery
The smaller, lighter MAX battery, with a reduce weight and runtime.
This battery must be used with the Assist MAX, Nose Cone B.
Volts: 40V
Energy: 332.64Wh
MAX Travel Battery
Yes, now you can take on the plane ! Must travel as “Carry ON” you can’t check with your baggage.
This battery must be used with the Assist MAX, Nose Cone
Volts: 40V
Energy: 438.61Wh
Removable Motor Cable (New for 2025)
With three simple screws, the motor plug can be removed, allowing the rider to change their cable length and, therefore, the motor mounting position, depending on the use case. This means you can easily change motor height through simple removal and installation of different cable lengths! Cables are available in a length of 20cm (8"), or 60cm (23.5”).
V2 Universal Motor Pod Mast Adaptor (new)
The Universal Motor Pod is an important part of the Foil Drive setup and it must be used with Foil Drive Mast Adaptors. Every kit for 2025 comes with the universal motor pod mast adaptor, so whatever mast you ride, Foil Drive can mount onto your mast. The outer sleeves are universal and can easily adapt from mast to mast by simply interchanging the internal universal mast adaptor.
The combination of the Universal Motor Pod and the is a v2 refinement of the original one piece motor pods that they started with. These outer sections are super strong injection moulded poly-carbonate fiberglass reinforced.
Every Universal Motor Pod comes with a common rear section that your motor mounts to via the Motor Puck and 2x Nose cones. There is one short nose and one long nose cone to accommodate the inner universal mast adaptor. You simply need to use the correct length nose cone for your particular mast. These are very obviously different lengths, so its not too hard to get wrong!
3 Blade Prop - Optional
It is specifically designed for riders who require more low-end torque, whether this is due to using a low volume board, a smaller or higher aspect foil than normal, or being a heavier rider.
We do not recommend using the Three Blade Propeller Hub for prolonged e-foiling at full throttle as this will drain your battery much quicker and could cause the electronics to go into thermal overload protection. The three blade propellers will draw more watts / power than the two blade prop that can " unload " at full throttle when on foil. Do NOT use three blade prop above 90% throttle continuously when e-foiling. You must let the ESC in the box cool in the water from time to time
